Parts & Components

CS-APC-CINSTAN-VF

Qty 1/400ml Verification Fluid. Non-hazardous petroleum-based mineral oil verification fluid used for verification and performance checking of industrial oil particle counter instruments. Not for medical, diagnostic, biological, pharmaceutical, or food use. For industrial laboratory use only.

CS-APC-CINSTAN-CFK-2806

Calibration fluid used exclusively for instrument calibration and performance verification of laboratory particle counters. Not a pharmaceutical, not consumable, not hazardous. For industrial use only. Total volume 400 mL 1 bottle

CINSTAN - Calibration Fluid Kit

CS-CINSTAN-CFK Non-hazardous petroleum-based mineral oil calibration fluids used for calibration and verification of oil particle counter instrument. Not for medical, diagnostic, or biological use. For industrial use only. No pharmaceutical or food application. Includes five calibration fluid bottles one each of PSL40 SCF 200 ml, PSL60 SCF 200ml, PSL80 SCF 200ml, CINStan SuperCleanFluid 400ml, ConoStan 2806 400ml

Super Clean Fluid - 400ml Bottle

Calibration fluid used exclusively for instrument calibration and performance verification of laboratory particle counters. Not a pharmaceutical, not consumable, not hazardous. For industrial use only. Total volume 400 mL 1 bottle 400 mL.

CINStan Verification Fluid (1 bottle)

CINStan Verification Fluid (1 x 400ml bottle)

Gilson 25ml Uptake Tube

25ml Sample Uptake Tube for CINRG APC, HVA Instruments

Gilson 1ml Uptake Tube

1ml Sample Uptake Tube for CINRG SDS Instruments

Klotz LDS 45/50 Particle Sensor (New)

Klotz LDS 45/50 particle sensor for CINRG APC Instruments

Gilson 10ml Uptake Tube

10ml Sample Uptake Tube for CINRG APC, HVA Instruments

Baumer Level Sensor (HVA)

Custom-configured ultrasonic level sensor with pre-installed M8 male connector, designed exclusively for use in the CINRG HVA robotic viscometer system. Replacement spare part.

CINRG 200-Position Sample Tray

Anodized aluminum 200-position sample tray suitable for the CINRG HVA robotic viscometer system

Tubing Kit -25ft (CS-SDS)

Tubing Kit -25ft -Includes 18 Tube Nuts and washers (CS-APC)

Needle drip removal cylinder (New Wash Station Only)

Machined Plastic

Viton Rubber gasket set - Viscometer Bath

1 Set Containing 4 custom-cut Viton gaskets for Viscometer Bath Tubes

AC/DC Desktop Power Adapter

24V 120 W AC/DC External Desktop (Class I) Adapter

Tubing Kit -25ft - Includes 18 Tube Nuts and yellow Ferrules (CS-SDS)

Tool kit,10ml Piston Nose Mounting

HVA-Sample Uptake Tube with Header

Machined Stainless Steel Tube

Tubing Kit -25ft - Includes 18 Tube Nuts and yellow Ferrules (CS-HVA)

APC 3 - In-Line Filter Assembly with Delivery Tubing

Complete assembly of onw inline filter (with o-ring, filter screen) and delivery tubing with fittings on both ends of the filter

Gilson 6 Port PEEK Valve

APC2 Calibration Hardware Kit

Calibration hardware kit for laboratory particle counter includes aluminum base, acetal stirrer, PTFE tubing, brackets, cups, and stainless-steel fasteners.

Counter for LDS Sensor

E USB Counter for the operation of LDS sensors Counter for the CINRG CS-APC-2. The USB box is the interface and power supply for LDS sensors for particle counting. The analogue particle impulses of the LDS sensors are converted into a digital protocol for transmitting particle sizes and particle numbers to a PC (USB interface). An analogue output or signal output is available for operating at SPS panels or installations. In a simple operating mode 1 - 16 size classes can be transmitted with the box - this is especially suitable for operating several measuring systems at one evaluation system or for lab equipment of all 4096 size classes. An LED display or a signal output signalizes a system error. As an option, the box can be extended with a display and an internal data memory. In this case the system can also be used as mobile device or online measuring unit after parameter configuration. Multi-channel counter General data: Dimensions (W/H/D): 200mm / 60mm / 120mm~ Weight: 500 g ~ Sensor connector plug: Lemosa 10-pin ~ Ambient conditions : Application area: indoors and outdoors Max. height: up to 2000 m N.N. Ambient temperature: 5 - 40 °C Safety class: IP20 Degree of contamination: 2 ~ Power supply: Power supply: 12V 1A Fuse type: T1.6A L250V Surge category: 2 Mains fluctuations: max. +/- 5% ~ Connector: Connector: bipolar Texas connector Pin 1 - Signal: 12 V Pin 2 - Signal: M