CS-APC-3

Calibration and lifecycle support services for CINRG APC3 instrument

Calibration and lifecycle support services for CINRG APC laboratory oil analysis instruments, including system verification, inspection, adjustments, and technical support

Lifecycle support services for CINRG APC2 instrument

Lifecycle support services for CINRG APC laboratory oil analysis instruments, including system verification, inspection, adjustments, and technical support

Verification fluid Pack - 4 x 400ml bottles

CS-CINSTAN-VF Verification Fluid set 4x 400ml. Non-hazardous petroleum-based mineral oil verification fluid used for verification and performance checking of industrial oil particle counter instruments. Not for medical, diagnostic, biological, pharmaceutical, or food use. For industrial laboratory use only.

Super Clean Fluid - 400ml Bottle

Calibration fluid used exclusively for instrument calibration and performance verification of laboratory particle counters. Not a pharmaceutical, not consumable, not hazardous. For industrial use only. Total volume 400 mL 1 bottle 400 mL.

Process Control Sample Pack - 4 x 400ml bottles

CS-CINSTAN-PCS Process control standards set 4x 400ml. Non-hazardous petroleum-based mineral oil verification fluid used for verification and performance checking of industrial oil particle counter instruments. Not for medical, diagnostic, biological, pharmaceutical, or food use. For industrial laboratory use only.

Calibration Fluid Kit

CS-CINSTAN-CFK Non-hazardous petroleum-based mineral oil calibration fluids used for calibration and verification of oil particle counter instrument. Not for medical, diagnostic, or biological use. For industrial use only. No pharmaceutical or food application. Includes five calibration fluid bottles one each of PSL40 SCF 200 ml, PSL60 SCF 200ml, PSL80 SCF 200ml, CINStan SuperCleanFluid 400ml, ConoStan 2806 400ml

2806 Calibration Fluid - 400ml Bottle

CS-CINSTAN-2806 calibration fluid used exclusively for instrument calibration and performance verification of laboratory particle counters. Not a pharmaceutical, not consumable, not hazardous. For industrial use only. Total volume 400 mL 1 bottle 400 mL.

Fittings -Pack of 10 Flanged Nut (Acetal) with Washer (Stainless Steel)

Flanged Nut/Washer 1/8" (10 PIECES)

Flanging Tool Kit

Hand Held Tool kit to make flanged ends on delivery tubing

Verity 4220 Dual Syringe Pump with RS-232 Interface

Only Drive - 10ml/25ml syringes sold separately

Tool kit,10ml Piston Nose Mounting

Gilson 10ml Uptake Tube Piston Nozzle

10ml Syringe Piston Seal

Gilson 10ml Uptake Tube

CS-HVA-1 Genuine Spare Parts Overview: CS-HVA-1 Genuine Spare Parts Specifications: 10ml SYRINGE

Syringe Pump Opto Detector

Syringe Pump Opto Detector

Counter for LDS Sensor

E USB Counter for the operation of LDS sensors Counter for the CINRG CS-APC-2. The USB box is the interface and power supply for LDS sensors for particle counting. The analogue particle impulses of the LDS sensors are converted into a digital protocol for transmitting particle sizes and particle numbers to a PC (USB interface). An analogue output or signal output is available for operating at SPS panels or installations. In a simple operating mode 1 - 16 size classes can be transmitted with the box - this is especially suitable for operating several measuring systems at one evaluation system or for lab equipment of all 4096 size classes. An LED display or a signal output signalizes a system error. As an option, the box can be extended with a display and an internal data memory. In this case the system can also be used as mobile device or online measuring unit after parameter configuration. Multi-channel counter General data: Dimensions (W/H/D): 200mm / 60mm / 120mm~ Weight: 500 g ~ Sensor connector plug: Lemosa 10-pin ~ Ambient conditions : Application area: indoors and outdoors Max. height: up to 2000 m N.N. Ambient temperature: 5 - 40 °C Safety class: IP20 Degree of contamination: 2 ~ Power supply: Power supply: 12V 1A Fuse type: T1.6A L250V Surge category: 2 Mains fluctuations: max. +/- 5% ~ Connector: Connector: bipolar Texas connector Pin 1 - Signal: 12 V Pin 2 - Signal: M

Volume Check Disc

Volume Check Disc

Viton Tubing 1/4" OD 1/8" ID (1 foot)

Viton Tubing 1/4" OD 1/8" ID (1 foot)

Tubing Kit -25ft.

Tubing Kit -25ft.

Tube Clamps for in-line filter - pack of 20

Tube Clamps for in-line filter - pack of 20

Solvent Line with Stainless Steel Guide Tube

Solvent Line with Stainless Steel Guide Tube

PTFE Tubing 1/8" ID X 0.085" ID (25ft x 2.15mm)

PTFE Tubing 1/8" ID X 0.085" ID (25ft x 2.15mm)

LDS Sensor Mount

LDS Sensor Mount

In-line filter housing with tubing and connections

In-line filter housing with tubing and connections

Tubing Kit -25ft - Includes 18 Tube Nuts and yellow Ferrules (CS-APC)

Gilson 6 Port PEEK Valve

Verity Pump Valve Position Opto Detector - OEM Version

Gilson Version

PCBA for 4000 Series Verity Syringe Pump

PCBA, 4000 Series Syringe Pump (Verity Pump)

O-Ring replacment set for CS-SHWN Sampling Head (6 pieces)

Pack contains Qty 4 of Size008 Brown, Qty 2 of 1x2

O-Rings Replacement for LDS Sensor (8 pieces)

Pack contains Qty 4 each of 2x10 and 2x6

O-Ring Replacement for In-line filter - pack of 25

Pack of Qty 25 2x7

Valve Motor Assembly for 4000 series syringe pump

Drip Diverter (3 Pack)

Sensor waste line (8 ft)

APC 3 - In-Line Filter Assembly with Delivery Tubing

Complete assembly of onw inline filter (with o-ring, filter screen) and delivery tubing with fittings on both ends of the filter

Tubing Kit -25ft -Includes 18 Tube Nuts and washers (CS-APC)

PTFE Tubing 1/8in x 0.085in - 25ft long

PTFE Tubing 1/8" x 0.085" - 25ft

Verity Pump Drive Opto Detector (2 Pack)- Non OEM

CINRG Version

Replacement Stirring Paddle (Four blade)

Machined anodized aluminum stirring paddle for APC laboratory sample mixing system.

Sensor Flushing Kit (5 Pieces)

Pack of 5 20ml Plastic uptake tubes with luer lock adapters

Gilson 25ml Uptake Tube Piston Nozzle

25ml Syringe Piston Seal

Gilson 25ml Uptake Tube

25ml SYRINGE

APC3 Preventative Maintenance Kit

CS-PM-KIT Preventative Maintenance Kit for CINRG APC Lab Instrument includes Viton O rings, 3ml Grease, PTFE tubing, inline filter, accessories, cleaning tools and replacement hardware

AC/DC Desktop Power Adapter

24V 120 W AC/DC External Desktop (Class I) Adapter

Micro cleaning brush for LDS45/50 Sensor

Micro cleaning brush for LDS45/50 Sensor

Klotz LDS 45/50 Particle Sensor (Refurbished Service Exchange Unit)

Klotz Particle Count Sensor Exchange Unit

Klotz LDS 45/50 Particle Sensor Repair

Sensor Factory Repair Service

Klotz LDS 45/50 Particle Sensor (New)

Particle Count Sensor

APC-Replacement In-Line Filter Screens - Pack of 10

Replacement filter screens (10 pcs)

4000 Series Drive Module, WO/Valve

With Chassis, Motor and PCB

APC22M Calibration Hardware Kit

Calibration hardware kit for laboratory particle counter includes aluminum base, acetal stirrer, PTFE tubing, brackets, cups, and stainless-steel fasteners.

102 Position Sample Tray

Sample Tray for CS-APC-2

Gilson 3 Port PEEK Valve

Peek Valve Assembly